With not forgetting

• Initially take care has to preferably locate the various parts by a numbering.
• Then last once the cleanliness of the bridge and parts to be stuck are checked.
• Not to forget to take the gloves, the adhesive, the spatula with teeth.
• The board will enable you to rest to spend the adhesives or the weights allowing a good behaviour, time to dry or strengthen

Procedure

• The installation has, in all the case, the center for starting point.
• For the installation blade by blade one takes again then outside towards the interior
• While for the installation by plate one continuous of the center towards outside

Joining

• One spreads out the adhesive with the spatula with tooth square (conso.moy. 700ml/m²) by small surface allowing to an installation easier
• Progressively one to us rogue the blades or plates and one maintenance using adhesives or of weight
• to assemble the plates or the blades end to end one useful the same adhesive by making to a pad before junction of the two elements
• After the junction carried out one maintenance still with adhesive

• Once finished joining (to count 12 with 24h) it is necessary to clean the traces of adhesive in the grooves and to withdraw all that can obstruct for caulking